Intro:
Agar aapka MacBook slow chal raha hai ya multitasking mein dikkat aa rahi hai, toh RAM upgrade karna ek accha option hai. Yeh guide aapko dikhayegi kaise apne MacBook ki RAM ko safely replace ya upgrade karein.

🧰 Tools You’ll Need

  • Phillips #00 screwdriver

  • Spudger ya plastic pry tool

⚠️ Safety Tips

  • MacBook ko shutdown karo aur power unplug kar do.

  • Anti‑static surface pe kaam karo.

  • Battery connector ko disconnect karna zaroori hai taaki electrical discharge na ho.

📋 Step-by-Step Instructions

Step 1: Lower Case Screws Remove Karo

  • MacBook ko ulta rakho.

  • 10 screws remove karo:

    • 7 screws (3 mm)

    • 3 screws (13.5 mm) (hinge side)

Step 2: Lower Case Ko Lift Karo

  • Thoda lift karo lower case ko aur peeche ki taraf slide karo taaki mounting tabs free ho jaayen.

  • Phir poori case ko hata lo.

Step 3: Battery Disconnect Karo

  • Spudger ka flat end use karo battery connector ko gently lift kar ke logic board se disconnect karo.

Step 4: RAM Ko Access Karo

  • RAM slot ke upar metal bracket ko dhyan se dekho.

  • Bracket ko gently side ki taraf push karo taaki RAM chip free ho jaaye.

Step 5: RAM Chip Ko Remove Karo

  • RAM chip ko dono sides se gently push karo taaki chip “pop” ho jaaye.

  • Jab chip thoda upar aaye, usse straight pull karo aur socket se nikaal lo.

  • Agar doosri RAM chip bhi hai, toh same process repeat karo.

✅ Reassembly

Sab steps ko ulta karte hue:

  • Nayi RAM chip ko socket mein daal ke gently press karo taaki wo lock ho jaaye.

  • Battery connector ko wapas logic board mein connect karo.

  • Lower case ko wapas laga ke screws tight karo.

Scroll to Top