Intro:
Agar aapka MacBook ka keyboard, palm rest area, ya power button damage ho gaya hai, ya dent/crack aaya hai, toh upper case replace karna zaroori ho sakta hai. Is guide mein hum seekhenge kaise upper case ko safely remove aur replace karte hain.

🧰 Tools You’ll Need:

  • Phillips #00 screwdriver

  • T6 Torx screwdriver

  • Spudger

  • Plastic opening tool

  • Tweezers (optional)

  • New upper case (with keyboard and power button)

⚠️ Safety Pehle:

  • MacBook ko shutdown karo aur power adapter remove karo.

  • Static-free surface pe kaam karo.

  • Battery disconnect karna must hai to prevent short circuits.

📋 Step-by-Step Instructions:

🔹 Step 1: Bottom Case Remove Karo

  • MacBook ko ulta rakho.

  • Neeche ke 10 screws remove karo using Phillips screwdriver (3 screws long hote hain).

  • Bottom case ko gently upar uthao aur hata do.

🔹 Step 2: Battery Disconnect Karo

  • Spudger ka use karke battery connector ko logic board se gently disconnect karo.

🔹 Step 3: Hard Drive, Optical Drive, Fan, and Logic Board Ko Remove Karo

Yeh steps thoda detail mein hain, but upper case access ke liye zaroori hain:

  • Hard drive: Bracket ke screws remove karo, cable disconnect karke drive hatao.

  • Optical drive: Screws and cables remove karo.

  • Fan: Screws and connector hatao.

  • Logic board: All connectors (keyboard, display, mic, battery indicator, etc.) carefully disconnect karo. Logic board ke screws remove karke board ko lift karo.

📌 Step-by-step removal same hai jaise logic board replacement guide mein diya gaya hai.

🔹 Step 4: Upper Case Ready for Removal

  • Ab jab sab components remove ho gaye hain, upper case ko gently lift karo.

  • Check karo koi cable ya wire abhi bhi attach toh nahi hai.

🔹 Step 5: Transfer Remaining Components (if needed)

Agar aapka naya upper case empty hai (without trackpad, speaker, etc.), toh:

  • Trackpad, keyboard backlight, aur power button ko purane case se nikaal kar naye mein install karo.

🔹 Step 6: New Upper Case Install Karo

  • New upper case ko base pe place karo.

  • Logic board ko align karke wapas lagao.

  • Sab cables aur components ko wapas connect karo:

    • Display cable

    • Keyboard/Trackpad cable

    • Speakers

    • Battery indicator

    • Mic

    • Fan

    • Hard drive

    • Optical drive

  • Screws tighten karo as per their positions.

🔹 Step 7: Battery Reconnect & Bottom Case Close Karo

  • Battery connector ko logic board se jodo.

  • Bottom panel place karo.

  • 10 screws wapas tighten karo.

✅ Final Check:

  • MacBook ko on karo.

  • Power button press karo aur system boot ho raha hai ya nahi check karo.

  • Keyboard, trackpad, and speakers properly kaam kar rahe hain ya nahi test karo.

💡 Tips:

  • New upper case buy karte waqt ensure karo ki keyboard layout same ho.

  • Agar keyboard ya power button kaam nahi kare, toh cable connection ya seating check karo.

  • Ye replacement thoda time-consuming hai — patience rakho aur cable handling gentle rakho.

Scroll to Top