Intro:
Agar aapka MacBook ka right clutch hinge toot gaya hai ya loose ho gaya hai, toh display properly open/close nahi hoga. Is guide se aap damaged hinge ko replace kar sakte hain.

🧰 Tools You’ll Need

  • Phillips #00 screwdriver

  • T6 Torx screwdriver

  • Spudger ya plastic pry tool

⚠️ Safety Tips

  • MacBook ko shutdown karo aur charger unplug kar do.

  • Anti‑static surface pe kaam karo.

  • Battery connector ko disconnect karna zaroori hai taaki electrical discharge na ho.

📋 Step-by-Step Instructions

Step 1: Lower Case Screws Remove Karo

  • MacBook ko ulta rakho.

  • 10 screws remove karo:

    • 7 screws (3 mm)

    • 3 screws (13.5 mm) (hinge side)

Step 2: Lower Case Ko Lift Karo

  • Thoda lift karo lower case ko aur peeche ki taraf slide karo taaki mounting tabs free ho jaayen.

  • Phir poori case ko hata lo.

Step 3: Battery Disconnect Karo

  • Spudger ka flat end use karo battery connector ko gently lift kar ke logic board se disconnect karo.

Step 4: Subwoofer/Right Speaker Cable Ko Disconnect Karo

  • Spudger ka flat end use karo subwoofer/right speaker cable connector ko gently pry kar ke logic board se disconnect karo.

  • Socket ko na damage karein, bas connector ko gently lift karein.

Step 5: Camera Cable Ko Disconnect Karo

  • Camera cable connector ko horizontally slide kar ke socket se disconnect karo.

  • Cable ko parallel surface se pull karein, seedha upar na karein, warna connector damage ho sakta hai.

Step 6: Camera Data Cable Ko Deroute Karo

  • Camera data cable ko optical drive ke channel se carefully nikaalo.

Step 7: Camera Cable Bracket Screws Remove Karo

  • Camera cable bracket ko upper case se secure kar rahe screws remove karo:

    • 2 screws (8 mm Phillips)

    • 1 screw (4 mm Phillips)

  • Bracket ko gently slide kar ke remove karo.

Step 8: Clutch Cover Ko Slide Karo

  • Clutch cover ko right side ki taraf slide karo.

  • Yeh approximately 1/4″ move karega aur ruk jayega.

  • Force na lagayein, bas gently slide karein.

Step 9: Clutch Cover Ko Lift Karo

  • Clutch cover ko gently back and forth rock karte hue usse display se alag karo.

  • Jab tak wo framework se free na ho jaye, tab tak gently move karte raho.

Step 10: Clutch Cover Ko Remove Karo

  • Jab clutch cover free ho jaye, usse display se completely remove kar lo.

Step 11: Right Clutch Hinge Screw Remove Karo

  • Right clutch hinge ko display se secure kar rahe 5.2 mm T6 Torx screw ko remove karo.

Step 12: Remaining Clutch Hinge Screws Remove Karo

  • Right clutch hinge ko display se secure kar rahe 2 remaining 5.2 mm T6 Torx screws ko remove karo.

Step 13: Right Clutch Hinge Ko Remove Karo

  • Right clutch hinge ko display se gently remove kar lo.

✅ Reassembly

Sab steps ko ulta karte hue:

  • Naya right clutch hinge install karo

  • Screws, cables, brackets — sab theek se lagao

  • Battery connector ko wapas connect karo

  • Lower case ko wapas laga ke screws tight karo

Scroll to Top