Intro

Agar aapko zyada storage chahiye ya SSD ke saath HDD combo banana hai, toh aap apni MacBook ki Optical drive (CD/DVD drive) ki jagah ek second drive install kar sakte ho using a hard drive caddy. Is guide se aap step‑by‑step samajh sakte ho kaise dual‑drive setup kiya jaata hai. iFixithelp.ramcity.com.au

🧰 Tools & Parts You’ll Need

  • Phillips #00 screwdriver

  • Spudger (plastic opening tool)

  • New SSD or HDD (2.5-inch SATA)

  • Optical bay drive caddy (Data Doubler style)

  • (Optional) External enclosure or SATA‑to‑USB cable for data transfer

⚠️ Safety First

📋 Step-by-Step Instructions

🔹 Step 1: Lower Case Remove Karo

  • MacBook ko ulta karo.

  • Neeche ke 10 screws remove karo (7 short + 3 long screws) using Phillips #00.

  • Fir bottom panel ko gently lift karke peeche slide kar ke hatao. iFixit

🔹 Step 2: Battery Disconnect Karo

🔹 Step 3: Disconnect Optical Drive Cable (Optional)

  • Agar zaroorat lage, toh subwoofer/sc speaker ya camera cable connectors ko gently disconnect karo.

  • Optical drive ke screw ya padding ke baare mein bhi camera cable retainer ko slide karna pad sakta hai. iFixit

🔹 Step 4: Optical Drive Remove Karo

  • Optical drive ke screws remove karo.

  • Optical drive connector ko spudger se gently logic board se separate karo.

  • Drive ko MacBook se lift karke side mein rakh do. iFixit

🔹 Step 5: Prepare the Drive Caddy

  • Optical bay mein aane wala caddy usme SSD/HDD place karo.

  • Agar koi plastic spacer ho, use nikaal do (clip se press karke).

  • Bracket ke screws use karo so it fits in place of original optical drive. iFixit

🔹 Step 6: Install Caddy in Optical Bay

  • Caddy ko optical bay mein insert karo, cables route correct rakho.

  • Screws se secure karo taaki caddy stable rahe.

🔹 Step 7: Reconnect Battery

  • Battery connector ko logic board se wapas attach karo.

🔹 Step 8: Close the Bottom Case

  • Lower case ko align karo.

  • Wapas 10 screws (3 long, 7 short) tighten karo.

✅ Final Setup & Testing

  • MacBook on karo.

  • Agar nayi drive blank ho, Disk Utility open karke format karo (e.g., APFS or Mac OS Extended HFS+).

  • SSD pe macOS install karo ya Time Machine backup se restore karo.

  • Agar second HDD use kar rahe ho, system per automatically detect hona chahiye. iFixit+1Apple Communities

💡 Useful Tips

  • MacBook Pro Mid‑2010 ka SATA interface 3.0 Gb/s (SATA 2.0) support karta hai, SSD se speed up hoti hai. MacSales+14everymac.com+14Lifewire+14

  • Agar hard drive cable brittle dikhe (Mid‑2010 models mein common issue hai), toh cable replace karna consider karo ya protective electrician tape laga do. iFixit+2everymac.com+2

  • SSD setup ke liye Time Machine se clean install ya clone karke easy migration kar sakte ho.

  • Boot option press kar ke ALT/OPTION key hold karna during power-on to choose startup disk.

Scroll to Top