Intro:
Agar aapke MacBook Pro ka display broken hai, lines aa rahi hain, backlight fail ho gaya hai, ya black/dark patch dikha raha hai, toh poora display assembly replace karke problem solve ho sakta hai.

🧰 Tools You’ll Need:

  • Phillips #00 screwdriver

  • T6 Torx screwdriver

  • Spudger

  • Plastic opening tool / tweezers (optional)

  • New compatible display assembly

⚠️ Safety First:

  • MacBook ko shutdown karo aur magsafe unplug karo.

  • Battery ko disconnect karna bahut zaroori hai.

  • Static-free surface pe kaam karo.

📋 Step-by-Step Instructions:

🔹 Step 1: Bottom Case Remove Karo

  • MacBook ko ulta rakhkar bottom ke 10 Phillips screws nikaalo (3 long (hinge side), 7 short).

  • Bottom panel ko gently lift karo aur side mein rakh do.

🔹 Step 2: Battery Disconnect Karo

  • Spudger se battery connector ko logic board se gently unplug karo.

🔹 Step 3: Camera & Antenna Cables Disconnect Karo

  • iSight (camera) cable, AirPort antenna wires, aur display data cable ko gently spudger ya finger se disconnect karo.

  • Force mat lagao — connectors delicate hote hain.

🔹 Step 4: Display Assembly Remove Karo

  • Display hinges ke T6 Torx screws ko remove karo.

  • Display assembly ko base se gently lift karo aur fully detach karo.

🔹 Step 5: New Display Install Karo

  • New display ko same angle mein base se align karo.

  • T6 screws se display hinges ko tighten karo.

🔹 Step 6: Camera & Antenna Wires Reconnect Karo

  • Microphone / camera cable aur antenna wires ko sahi order mein connect karo.

  • Ensure karo connectors properly seated hain.

🔹 Step 7: Battery Reconnect & Bottom Case Close Karo

  • Battery connector ko logic board se wapas jodo.

  • Bottom panel ko place karo and 10 screws tighten karo (3 long & 7 short).

✅ Final Check:

  • MacBook ko on karo.

  • Display brightness, color aur resolution settings check karo.

  • Flicker, dead pixels, ya display alignment issue check karo.

💡 Tips:

  • Replacement display assembly original or quality-spare compatible ho.

  • Display connect karne se pehle cable heights aur positions check karo — koi pinching na ho.

  • Sab cables connect hone ke baad reboot karo aur Apple menu → Display settings → calibrated resolution check karo.

Scroll to Top