Intro:
Agar aapke MacBook ka right speaker ya subwoofer (bass sound) kaam nahi kar raha, ya sound distort ho raha hai, toh ye guide help karegi aapko is component ko replace karne mein.

🧰 Tools You’ll Need:

  • Phillips #00 screwdriver

  • Spudger

  • Tweezers (optional)

⚠️ Safety Tips:

  • MacBook ko shutdown karo aur unplug karo.

  • Anti-static surface pe kaam karo.

  • Battery disconnect karna zaroori hai for safety.

📋 Step-by-Step Instructions:

🔹 Step 1: Bottom Case Remove Karo

  • MacBook ko ulta rakho.

  • Neeche ke 10 Phillips screws remove karo (3 long screws hinge ke paas wale honge).

  • Lower case ko gently upar uthao aur hata do.

🔹 Step 2: Battery Disconnect Karo

  • Spudger ka use karke battery connector ko logic board se disconnect karo.

🔹 Step 3: Hard Drive Remove Karo

  • Hard drive bracket ke 2 screws remove karo.

  • Bracket hatao.

  • Hard drive ko thoda lift karo aur SATA connector disconnect karo.

  • Hard drive ko side mein rakh do.

🔹 Step 4: Optical Drive Remove Karo

  • Optical drive ke screws remove karo.

  • Uske connected cables (power, SATA, IR sensor, mic wire) gently disconnect karo.

  • Optical drive ko lift karke nikaal lo.

🔹 Step 5: Subwoofer & Right Speaker Locate Karo

  • Subwoofer + right speaker module ek single unit hota hai, jo logic board ke side mein mounted hota hai.

  • Usse hold karne wale screws nikaalo.

🔹 Step 6: Disconnect Speaker Cable

  • Speaker/subwoofer ke cable ko logic board se gently disconnect karo using a spudger.

  • Speaker module ko carefully lift karo aur nikaal lo.

🔹 Step 7: New Speaker Module Install Karo

  • Naya subwoofer + right speaker unit same position mein fit karo.

  • Cable ko logic board se connect karo.

  • Screws se secure karo.

🔹 Step 8: Optical Drive & Hard Drive Reinstall Karo

  • Optical drive ko wapas place karo, cables connect karo, screws tight karo.

  • Hard drive ko fit karo, bracket lagao, SATA cable connect karo.

🔹 Step 9: Battery Reconnect & Bottom Case Close Karo

  • Battery connector ko fir se jodo.

  • Bottom case lagao, 10 screws tight karo.

✅ Final Check:

  • MacBook on karo.

  • Music ya video play karke right speaker aur bass (subwoofer) test karo.

  • Sound clean, balanced aur full volume pe sahi aa raha hai ya nahi — confirm karo.

💡 Tips:

  • High-quality replacement speaker module lo (same model).

  • Installation ke baad System Preferences > Sound > Balance setting check karo.

  • Wiring gently handle karo — zyada force se damage ho sakta hai.

Scroll to Top