Intro:
Agar aapka MacBook ka built-in mic kaam nahi kar raha, voice record nahi ho rahi, ya distorted sound aa rahi hai — toh ho sakta hai microphone damage ho gaya ho. Is guide mein aap seekhenge kaise internal mic ko replace karte hain.

🧰 Tools You’ll Need:

  • Phillips #00 screwdriver

  • Spudger

  • Tweezers (optional)

  • New compatible microphone module

⚠️ Safety Tips:

  • MacBook ko shutdown karo aur power cable disconnect karo.

  • Anti-static surface pe kaam karo.

  • Battery disconnect karna zaroori hai — short circuit se bachne ke liye.

📋 Step-by-Step Instructions:

🔹 Step 1: Bottom Case Remove Karo

  • MacBook ko ulta rakho aur 10 Phillips screws nikaalo.

    • 3 screws long hote hain, baaki short — alag se rakh lo.

  • Bottom panel ko gently lift karo aur side mein rakh do.

🔹 Step 2: Battery Disconnect Karo

  • Spudger ka use karke battery connector ko logic board se gently disconnect karo.

🔹 Step 3: SuperDrive (Optical Drive) Ko Remove Karo

  • Optical drive ke upar connected cables (SATA & power) ko disconnect karo.

  • Drive ke screws remove karo.

  • Optical drive ko carefully nikaal lo.

🔹 Step 4: Microphone Location Identify Karo

  • Microphone logic board ke pass mounted hota hai, aur ek black wire display side ki taraf jaata hai.

  • Wire ko track karo jahan mic body se chipka hota hai.

🔹 Step 5: Microphone Remove Karo

  • Mic ke wire ko gently lift karo using spudger or tweezers.

  • Microphone usually adhesive se chipka hota hai — isliye dheere-dheere peel karo.

  • Mic ko completely nikaal lo.

🔹 Step 6: New Microphone Install Karo

  • Naya mic usi jagah pe fit karo jahan purana laga tha.

  • Adhesive ya tape se fix karo.

  • Wire ko proper routing ke saath place karo taaki kisi aur component ko block na kare.

🔹 Step 7: Reassemble Karo

  • Optical drive wapas install karo, cables connect karo, screws tighten karo.

  • Battery connector reconnect karo.

  • Bottom case lagao aur 10 screws wapas fix karo.

✅ Final Check:

  • MacBook on karo.

  • Voice Memos ya QuickTime open karke mic test karo.

  • Check karo voice record ho rahi hai ya nahi, aur clarity kaisi hai.

💡 Tips:

  • Internal mic replace karne ke baad agar sound issue continue ho, toh sound settings ya input source check karo.

  • High-quality replacement mic use karo for best performance.

  • Audio settings jaane ke liye: System Preferences > Sound > Input.

Scroll to Top