Intro:
Agar aapka MacBook ka left side hinge loose ho gaya hai, broken hai, ya screen wobble kar rahi hai, toh clutch hinge replace karna zaroori hai. Ye hinge screen ko base se connect karta hai. Is guide mein aap seekhoge kaise left hinge ko safely replace karte hain.

🧰 Tools You’ll Need:

  • Phillips #00 screwdriver

  • T6 Torx screwdriver

  • Spudger

  • Plastic opening tool (optional)

  • Tweezers (optional)

⚠️ Safety Reminder:

  • MacBook ko shutdown karo aur unplug karo.

  • Battery ko disconnect karna zaroori hai to avoid short circuits.

  • Static-free surface ya anti-static strap ka use karo.

📋 Step-by-Step Instructions:

🔹 Step 1: Bottom Case Remove Karo

  • MacBook ko ulta rakho.

  • Neeche ke 10 screws ko Phillips #00 screwdriver se nikaalo.

  • Bottom panel ko gently lift karke hata do.

🔹 Step 2: Battery Disconnect Karo

  • Spudger ka use karke battery connector ko logic board se disconnect karo.

🔹 Step 3: Camera Cable Disconnect Karo

  • Display ke near wala camera cable ko gently pull karke disconnect karo.

🔹 Step 4: Display Assembly Remove Karo

  • Logic board ke around ke screws aur display hinges ke T6 Torx screws ko remove karo.

  • Display assembly ko MacBook body se separate karo.

🔹 Step 5: Clutch Cover Hatayein

  • Display ke neeche ke part mein ek clutch cover hota hai (screen ke bottom pe).

  • Isse plastic tool ki help se carefully pry karo aur remove karo.

🔹 Step 6: Left Clutch Hinge Remove Karo

  • Left hinge ko hold kar rahe screws ko T6 screwdriver se nikaalo.

  • Purana hinge ko gently bahar nikaalo.

🔹 Step 7: New Hinge Install Karo

  • Naya left hinge ko sahi position mein align karo.

  • Screws ko tighten karo taaki hinge strong ho.

  • Make sure hinge move properly ho raha ho (na zyada tight, na loose).

🔹 Step 8: Display Assembly Wapas Lagao

  • Display ko body se fir se connect karo.

  • Camera cable ko reconnect karo.

  • Hinges ke screws aur sab parts ko wapas jod do.

🔹 Step 9: Battery Reconnect & Bottom Case Close Karo

  • Battery connector ko logic board se reconnect karo.

  • Bottom case wapas lagao aur 10 screws se secure karo.

✅ Final Check:

  • MacBook on karo.

  • Display smoothly open-close ho raha hai ya nahi — test karo.

  • Wobble ya tightness check karo.

  • Sab screws tight hain ya nahi — confirm karo.

💡 Tips:

  • Hinge repair karte waqt patience rakho — zyada force se display ya frame damage ho sakta hai.

  • Clutch cover fragile hota hai — carefully remove karo.

  • Sirf left hinge replace karne ke baad bhi MacBook balanced feel hona chahiye.

Scroll to Top