Intro:
Agar aapka MacBook Pro ka LCD display dead ho gaya hai, white screen, lines, ya backlight issue aa raha hai — lekin front glass theek hai, toh aap sirf LCD panel ko replace kar sakte ho. Ye guide aapko full step-by-step batayegi.

🧰 Tools You’ll Need:

  • Heat gun ya hair dryer

  • Suction cup

  • Plastic opening tools / spudger

  • Phillips #00 screwdriver

  • T6 Torx screwdriver

  • Tweezers (optional)

  • New LCD panel

⚠️ Safety Reminder:

  • MacBook ko shutdown karo aur unplug karo.

  • Static-free surface pe kaam karo.

  • Cracked screen handle karte waqt gloves ya eye protection pehna better hota hai.

📋 Step-by-Step Instructions:

🔹 Step 1: Front Glass Ko Remove Karo

  • Glass ke edges ko heat gun ya hair dryer se warm karo 1–2 min tak taaki glue soft ho jaaye.

  • Suction cup se glass ko thoda pull karo.

  • Plastic tool se dheere-dheere edges ko separate karo.

  • Glass ko safely side mein rakh do.

🔹 Step 2: LCD Screws Remove Karo

  • LCD panel ko hold karne wale screws (usually 4 sides pe) Phillips screwdriver se nikaalo.

  • Panel ko dheere se lift karo.

🔹 Step 3: Display Cables Disconnect Karo

  • LCD ke peeche ek ya do cables connected hoti hain.

  • Carefully connector clips ko unlock karo (plastic tabs hote hain).

  • Cables ko gently disconnect karo.

🔹 Step 4: Old LCD Panel Remove Karo

  • Cables disconnect hone ke baad LCD ko full tarah se nikaal lo.

  • Dhyan se handle karo — old screen ko damage na karo agar wapas use karna ho toh.

🔹 Step 5: New LCD Panel Install Karo

  • New LCD panel ko same jagah pe align karo.

  • Display cables ko connect karo aur connectors lock karo.

  • Screws ko wapas tighten karo LCD ke corners pe.

🔹 Step 6: Front Glass Reinstall Karo

  • Front glass ko gently wapas jagah pe lagao.

  • Agar glass self-adhesive hai toh bas press karo.

  • Agar adhesive strip lagani hai, toh border pe lagakar press firmly karo.

🔹 Step 7: Final Assembly

  • MacBook ko seedha rakho.

  • Screen pe koi fingerprints ya dust hai toh microfiber cloth se clean karo.

  • System ko on karo aur display test karo.

✅ Final Check:

  • MacBook boot hota hai ya nahi — check karo.

  • Display brightness, color, aur backlight sahi kaam kar raha hai ya nahi.

  • Koi flicker, dead pixels, ya cable loose toh nahi hai — ensure karo.

💡 Tips:

  • High-quality replacement LCD use karo for best results.

  • Glass remove karte waqt patience rakho — jaldi mein crack ho sakta hai.

  • LCD install karne se pehle dust-free environment mein kaam karo.

 

Scroll to Top