Intro:
Agar aapka MacBook slow ho gaya hai, ya aapko zyada storage chahiye, ya old hard drive crash ho gayi hai — toh aap easily ek nayi hard drive ya SSD install kar sakte ho. Ye guide aapko step-by-step process dikhayegi.

🧰 Tools You’ll Need:

  • Phillips #00 screwdriver

  • Torx T6 screwdriver

  • Spudger (optional)

  • New hard drive or SSD

  • External drive enclosure or SATA-to-USB cable (data transfer ke liye, optional)

⚠️ Safety First:

  • MacBook ko shutdown karo aur unplug karo.

  • Static discharge se bachne ke liye anti-static surface pe kaam karo.

  • Battery ko disconnect karna must hai for safety.

📋 Step-by-Step Instructions:

🔹 Step 1: Bottom Case Remove Karo

  • MacBook ko ulta rakho.

  • Neeche ke 10 screws ko Phillips #00 screwdriver se nikaalo.
    (3 screws lambe hote hain — unhe alag se rakho.)

  • Bottom case ko gently lift karo aur side mein rakh do.

🔹 Step 2: Battery Disconnect Karo

  • Spudger ya finger se battery connector ko logic board se gently disconnect karo.

  • Isse system safe rahega while working inside.

🔹 Step 3: Hard Drive Bracket Remove Karo

  • Hard drive ko secure karne wali black plastic bracket pe 2 Phillips screws honge.

  • Unhe remove karo aur bracket ko side mein rakh do.

🔹 Step 4: Hard Drive Remove Karo

  • Hard drive ko halki si lift karo.

  • SATA connector (data/power cable) ko carefully disconnect karo.

  • Ab hard drive MacBook se completely alag ho jayega.

🔹 Step 5: New Hard Drive Prepare Karo

  • Purane hard drive ke 4 side screws (T6 Torx) ko nikaal ke new drive pe lagao.

  • Ye screws nayi drive ko MacBook ke bracket mein fit hone mein help karenge.

🔹 Step 6: New Hard Drive Install Karo

  • SATA connector ko nayi hard drive se connect karo.

  • Drive ko carefully bay mein place karo.

  • Hard drive bracket wapas lagao aur uske 2 screws tighten karo.

🔹 Step 7: Battery Reconnect Karo & Bottom Case Close Karo

  • Battery connector ko logic board se wapas jod do.

  • Bottom case wapas place karo.

  • 10 screws ko unki jagah pe wapas lagao using Phillips screwdriver.

✅ Final Setup:

  • MacBook on karo.

  • Agar nayi drive blank hai, toh Disk Utility se format karo (macOS Extended or APFS).

  • macOS install karo ya Time Machine backup se restore karo.

💡 Tips:

  • SSD use karne se MacBook ki speed kaafi fast ho jaati hai.

  • Purani hard drive ko external USB case mein daal kar use backup drive bana sakte ho.

  • Data cloning software (like Carbon Copy Cloner or SuperDuper) se purani drive ka exact copy nayi drive pe bana sakte ho.

Scroll to Top