Intro:
Agar aapka MacBook ka display broken ho gaya hai, lines aa rahi hain, ya black screen dikha raha hai — toh poora display assembly replace karna padta hai. Ye guide aapko step-by-step batayegi kaise aap apne MacBook ka display khud replace kar sakte ho.

🧰 Tools You’ll Need:

  • Phillips #00 Screwdriver

  • T6 Torx Screwdriver

  • Spudger

  • Tweezers (optional)

⚠️ Safety Reminder:

  • MacBook ko shutdown karo aur unplug karo.

  • Battery disconnect karna bahut important hai to avoid damage or electric shock.

  • Work anti-static surface pe karo.

📋 Step-by-Step Instructions:

Step 1: Bottom Case Remove Karo

  • MacBook ko ulta rakho.

  • Neeche ke 10 screws ko Phillips #00 screwdriver se remove karo.
    (3 screws thode lambe hote hain – unhe alag rakh lena.)

  • Lower case ko upar lift karo aur side mein rakh do.

Step 2: Battery Disconnect Karo

  • Spudger ki madad se battery connector ko logic board se gently unplug karo.

  • Is step ko skip bilkul mat karo — ye MacBook ko protect karta hai.

Step 3: Camera Cable Disconnect Karo

  • Logic board ke paas camera cable hoti hai — use gently pull karke unplug karo.

  • Cable ko sidha kheecho, twist mat karo.

Step 4: Display Hinges ke Screws Remove Karo

  • Dono sides ke display hinges pe lage T6 Torx screws nikaalo.

  • Isse display frame MacBook se separate ho jayega.

Step 5: Display Assembly Hatana

  • Ab display assembly ko base se upar uthao aur alag karo.

  • Carefully handle karo – koi wire ya connector strain na ho.

Step 6: New Display Assembly Lagana

  • Naya display same angle aur position mein place karo.

  • Hinges ko align karo aur T6 Torx screws se secure karo.

Step 7: Camera Cable Reconnect Karo

  • Camera cable ko fir se logic board mein insert karo.

  • Make sure connection tight ho aur misaligned na ho.

Step 8: Battery Reconnect & Lower Case Lagao

  • Battery connector ko wapas logic board se connect karo.

  • Bottom case wapas fit karo aur 10 screws ko tighten karo.

✅ Final Check:

  • MacBook ko on karo aur display check karo.

  • Lines, flicker, ya loose connection toh nahi hai — yeh dekh lo.

  • Brightness aur resolution settings check karo.

💡 Tips:

  • Screws ko label kar lo ya sequence mein rakhna best hota hai.

  • Display delicate part hota hai – gloves pehna helpful hoga scratches avoid karne mein.

  • Old screen ko e-waste center pe responsibly dispose karo.

Scroll to Top