Intro:
Agar aapka MacBook battery charge nahi le raha, jaldi discharge ho raha hai, ya swelling dikh rahi hai — toh battery replace karna zaroori hai. Yahaan step-by-step simple guide di gayi hai jisse aap khud apne MacBook ki battery replace kar sakte ho.

🧰 Tools You’ll Need:

  • Phillips #00 Screwdriver – bottom screws ke liye

  • Tri-point Y0 Screwdriver – battery screws ke liye

  • Spudger – battery connector safely disconnect karne ke liye

⚠️ Safety Reminder:

  • MacBook ko shutdown kar lo.

  • Power cable ko unplug kar lo.

  • Battery replace karte waqt static-free surface pe kaam karo.

📋 Step-by-Step Instructions:

Step 1: Bottom Case Remove Karo

  • MacBook ko ulta rakho.

  • Neeche diye gaye 10 screws ko Phillips #00 screwdriver se nikaalo.
    (Note: 3 screws left side wale thode lambe hote hain — confuse mat hona.)

  • Bottom panel ko upar gently lift karo aur side mein rakh do.

Step 2: Battery Disconnect Karo

  • Battery ke connector ko spudger se gently disconnect karo.
    (Ye MacBook ke logic board se battery power cut karne ke liye hota hai.)

Step 3: Battery Remove Karo

  • Battery ke do tri-point Y0 screws ko nikaalo.

  • Battery ko carefully upar uthao aur MacBook se nikaal lo.
    (Force mat lagao – agar tight ho toh screws dobara check karo.)

Step 4: New Battery Install Karo

  • Nayi battery ko same jagah pe fit karo.

  • Tri-point screws se usse secure karo.

  • Battery connector ko logic board se fir se connect karo.

Step 5: Bottom Case Wapas Lagao

  • Bottom panel ko MacBook pe wapas fit karo.

  • Saare 10 screws ko sahi jagah pe lagao.

✅ Final Step:

  • MacBook on karo aur battery status check karo.

  • System Report → Power section mein jaake check karo ki battery recognized ho rahi hai ya nahi.

  • Charging bhi test kar lo.

💡 Tips:

  • Old battery ko safely dispose karo — local e-waste center pe de do.

  • MacBook use karne se pehle battery ko 100% charge kar lena best hoga.

Scroll to Top