Intro:
Agar aapke MacBook Pro ka Wi-Fi weak ya completely dead ho gaya hai, toh ho sakta hai ki AirPort antenna faulty ho. Is step-by-step guide se aap khud ghar par antenna replace kar sakte hain – thoda patience aur tools chahiye bas.

🛠️ Tools Required:

  • Phillips #00 Screwdriver

  • Spudger

  • T6 Torx Screwdriver

  • Tweezers

⚠️ Safety First:

  • MacBook shut down karo.

  • Battery disconnect karna zaroori hai, taaki koi electric shock na lage ya short circuit na ho.

  • Kaam shuru karne se pehle anti-static surface pe kaam karo ya ESD strap use karo.

📋 Steps:

Step 1: Lower Case Hatana

  • Sabse pehle MacBook ko ulta karo.

  • Neeche diye gaye 10 screws nikaalo using Phillips #00 screwdriver.

  • Lower case ko halki force se upar uthao aur side mein rakh do.

Step 2: Battery Disconnect karo

  • Battery connector ko gently spudger ki madad se disconnect karo.

  • Ye step skip mat karna — yahi safety ka main point hai.

Step 3: Camera Cable Hatana

  • Camera cable ko logic board se gently remove karo.

  • Cable ko kheenchte waqt force mat lagao — halka halka wiggle karo taaki easily nikal jaye.

Step 4: AirPort Card Screws Remove karo

  • T6 Torx screwdriver se AirPort card ke screws nikaalo.

  • Antenna wires ko bhi gently unplug karo.

Step 5: Display Assembly Remove karo

  • Hinges ke paas ke screws remove karo.

  • Pura display assembly (screen wala part) alag kar lo.

Step 6: AirPort Antenna Nikaalo

  • Old antenna ko carefully remove karo.

  • Naya antenna same position mein mount karo jaise pehla tha.

Step 7: Sab Kuch Wapas Assemble Karo

  • Sare wires aur screws waapas jod do.

  • Battery connect karo.

  • Lower case lagao aur screws tight karo.

✅ Final Check:

  • MacBook on karo aur Wi-Fi test karo.

  • Agar network mil raha hai aur speed theek hai, toh kaam successful raha!

💡 Tips:

  • Screws ko alag-alag box ya tape par chipka ke rakhna taaki confuse na ho jao.

  • Zyada force na lagayein — MacBook ke parts delicate hote hain.

Scroll to Top